This harmonic pressure validation case belongs to solid mechanics. It aims to validate the following parameters:
- Harmonic analysis
- Harmonic pressure
The simulation results from SimScale were compared to the numerical results in [SDLV124]\(^1\).
Geometry
Find below the plate geometry used for this validation case:
The geometry is a thick rectangular plate made up of steel.
The node coordinates are tabulated below:
| A | B | C | D | E | A’ | B’ | C’ | D’ | |
|---|---|---|---|---|---|---|---|---|---|
| x | 0 | 0.35 | 0.35 | 0 | 0.1575 | 0 | 0.35 | 0.35 | 0 |
| y | 0 | 0 | 0.25 | 0.25 | 0.125 | 0 | 0 | 0.25 | 0.25 |
| z | 0 | 0 | 0 | 0 | 0 | 0.01 | 0.01 | 0.01 | 0.01 |
The node E will be used to compare the results between SimScale and [SDLV124]\(^1\).
Analysis Type and Mesh
Tool Type: Code Aster
Analysis Type: Harmonic analysis
Mesh and Element Types: The mesh used in this project is a 1st order mesh created in SimScale with the standard algorithm.
| Case | Element Type | Number of Nodes | Element Technology |
|---|---|---|---|
| (A) | 1st Order Tetrahedral | 16870 | Standard |
Find below the mesh used for case A.
Simulation Setup
Material:
- Steel (linear elastic)
- \(E\) = 180 \(GPa\), \(v\) = 0.3
- \(\rho\) = 7800 \(kg/m^3\)
- Rayleigh damping
- Alpha coefficient = 3e-5 \(1/s\)
- Beta damping = 0.001 \(s\)
Boundary Conditions:
- Constraint:
- Fixed support on faces AA’B’B, BB’C’C, CC’D’D, and DD’A’A
- Load:
- Pressure of 1e5 \(Pa\) applied on face ABCD, with a harmonic frequency of 1500 \(1/s\)
Result Comparison
The results obtained from SimScale for the displacement magnitude DX at point E were compared to the results presented in [SDLV124].
| Case | Parameter | [SDLV124] | SimScale | Error (%) |
|---|---|---|---|---|
| (A) | Displacement Magnitude DX [\(m\)] | 9.0386e-7 | 8.2366e-7 | -8.87 |
Inspecting the module of X displacement for case A in the post-processor: