websights

Latest articles

Heat pump simulation software: system models vs 3D CFD

Heat pump simulation software models seasonal performance but assumes ambient air at the coil. See where 3D CFD fits and how to set up a siting study.

Kanchan Garg October 16, 2026
AEC, CFD, Energy, Thermal Simulation
what is pedestrian wind comfort

Pedestrian Wind Comfort: What It Is and How to Assess It

Pedestrian wind comfort explained: what causes strong wind at street level, how a pedestrian wind assessment works, and two CFD case studies.

Alexander Fischer September 28, 2026
AEC, CFD
Pedestrian wind comfort simulation of Central London around the 20 Fenchurch Street building using NEN 8100 comfort criteria

NEN 8100: the Dutch wind comfort and wind danger criteria explained

NEN 8100 grades a site by how often the hourly mean wind exceeds 5 m/s. Full comfort and danger tables, the calculation behind them, and where the standard applies.

Guillermo Giraldo September 25, 2026
AEC, CFD

ASCE 7-22: What the Standard Requires for Wind Loads, and Where CFD Fits

What ASCE 7 is, what changed in ASCE 7-22 for wind, which procedure applies to your building, and where CFD fits alongside code and wind tunnel testing.

Guillermo Giraldo September 23, 2026
AEC, CFD
hvac cfd

CFD Ventilation Simulation for HVAC Systems and Buildings

Run CFD ventilation simulation to cut pressure drop, map CO2 and airflow, and evidence ASHRAE 55, ISO 7730 and CIBSE compliance from your browser.

Peter Selmeczy September 21, 2026
AEC, CFD
lawson wind comfort criteria f

Lawson wind comfort criteria: LDDC, 2001, and the original compared

Full threshold tables for the general Lawson, Lawson LDDC and Lawson 2001 wind comfort criteria, plus which variant applies to your site and why.

Peter Selmeczy September 4, 2026
AEC, CFD
ashrae data center standards

How to design a data center cooling system for ASHRAE 90.4

ASHRAE 90.4-2025 explained: MLC and ELC limits, TC 9.9 temperature classes A1-A4 and H1, and how to verify data center cooling compliance with CFD before you build.

Peter Selmeczy September 1, 2026
AEC, CFD
indoor thermal standards featured

What Is ISO 7730? The Thermal Comfort Standard Explained

ISO 7730 sets the PMV and PPD method for thermal comfort. Its scope, the clause structure, what changed in the 2025 edition, and how it differs from ASHRAE 55.

Jon Wilde September 1, 2026
AEC, CFD
ashrae 55 featured v2

What Is ASHRAE 55? Basics of Thermal Comfort

ASHRAE 55-2023 sets the thermal comfort criteria for indoor spaces. Learn the six factors, the comfort zone, PMV and PPD limits, and how to prove compliance.

Jon Wilde August 30, 2026
AEC, CFD
hvac duct design featured image

HVAC duct design software: how to size, simulate, and validate ductwork

Compare duct design software by category, from ductulators and Manual D tools to online CFD. See what each does, what free tools miss, and how to validate.

David Heiny August 28, 2026
AEC, CFD
wind loads on buildings analysis with SimScale CFD

Wind load analysis: how to calculate wind loads on a building

Calculate wind loads on buildings with the ASCE 7 and Eurocode procedures, a worked example, and CFD for shapes the code methods cannot cover.

Peter Selmeczy August 26, 2026
AEC, CFD
computational wind engineering simulation

Wind engineering: the discipline and what its guidelines prescribe

What wind engineering is, what a wind engineer does, and what COST 732 and the AIJ guidelines actually prescribe for CFD domain size, mesh and turbulence models.

Guillermo Giraldo August 25, 2026
AEC, CFD
building aerodynamics and pedestrian wind comfort blog

Wind effects around buildings: how to tell which one you have

The seven named wind effects around buildings, how to tell which one is causing a problem on your site, and how to read a wind rose and a comfort map.

Peter Selmeczy August 24, 2026
AEC, CFD
wind experiment guide that will blow you away

Wind analysis: the seven types, and which one answers your question

The seven types of wind analysis, the question each answers, the standard each is judged against, and when in the design process to run them.

Alexander Fischer August 19, 2026
AEC, CFD
Robotic gripper CAD with overlaid simulation results in SimScale

Webinar highlights: how the fastest robotics teams validate designs with AI-native simulation

Robotics teams are under the same pressure as everyone else building hardware right now: less time to prove a design

Alex Graham July 24, 2026
AEC, Engineering AI, Featured
Next

Get started today