websights

Partner workflow

Close the loop between simulation and test

SimScale and Nominal have put simulation and test into one agentic loop. Nominal checks every simulated design against your test requirements. When a check fails, the SimScale Engineering AI agent revises the design and runs the next simulation, so parts reach the printer already meeting requirements.

SimScale Engineering AI agent simulating a cold plate, in front of a Nominal workbook comparing three designs with the physical test

How it works

Nominal decides whether a design changes. SimScale decides how.

01

Simulate

The SimScale Engineering AI agent sets up and runs the simulation in the cloud.

02

Check

Nominal’s Analyst agent checks the results against the program’s test requirements. If a check fails, it works out why.

03

Revise

The SimScale agent takes the requirement gap from Nominal, revises the geometry and runs the next simulation. You approve each change, and the loop repeats until the design passes.

04

Validate

Nominal puts the printed part’s test results next to the SimScale prediction, judged against the same requirements.

SimScale and Nominal: a 3D printed heat exchanger, designed to its test requirements

An additively manufactured heat exchanger has to pass three checks: pressure drop, transient response and thermal cycling. The first design fails on pressure drop. Wider passages fix that but slow the transient response, so the agent works through a third revision that passes every check.

SimScale x Nominal: agentic design-and-test workflow

Benefits

  • Requirements steer the design. A failed check reaches the SimScale agent with the gap attached, so each revision targets the requirement that failed.
  • Fewer prototypes and test rounds. Designs go to a physical prototype only after they pass in simulation, whether that prototype is machined, cast, molded or 3D printed. Every build and test campaign you skip saves weeks and budget.
  • Simulation and test on the same terms. Simulated and physical results sit side by side in Nominal, judged against one set of requirements.
  • A traceable record. Every revision, simulation and check links back to the decision behind it, building an evidence trail for design reviews and sign-off.
Ready to move faster?

Start simulating in minutes, not weeks

Get started today with AI-native engineering simulation