Tutorial 2: Pipe junction flow

Screenshot 1 - PostProcessorScreenshot
Screenshot 1 - PostProcessorScreenshot
PostProcessorScreenshot
2D
test_5 fine stack - Run 1 - SimulationRun
SimulationRun
3D
Stack_30000s - Run 1 - SimulationRun
SimulationRun
3D
Incompressible 5 - Test_air_flow_cathode - SimulationRun
SimulationRun
3D
Incompressible 3 - Run 1 - SimulationRun
SimulationRun
3D
Incompressible 08mm_droit - Run 1 - SimulationRun
SimulationRun
3D
Incompressible 1mm_droit - Run 1 - SimulationRun
SimulationRun
3D
neg_1mm_stack - Geometry
Geometry
3D
stack_ff_asm - Geometry
Geometry
3D
Neg_1mm_Cathode_air - Geometry
Geometry
3D
views 121
shares 0
airelect
Created

over 4 years ago

Last modified

over 4 years ago

Statistics
geometries 7 Geometries
meshes 7 Meshes
simulations 11 Simulation setups
runs 8 Results

About this project

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Start the Conversation

Default avatar

Log in to comment.

Not yet a SimScale user? Sign up.

Tutorial 2: Pipe junction flow by airelect | SimScale