SimScale simulation projects by simscale | Page 1

simscale's profile

This project shows the bending of an Aluminium pipe through rolling process.

This project uses an Incompressible (LBM) analysis type to evaluate the aerodynamics of a truck through a transient simulation.

This case aims to validate the cavitation model, available for the subsonic solver in a pipe section with an orifice plate

The case analyses a dam break with an overflow over a rectangular box.

This tutorial showcases how to use SimScale to run an electromagnetics simulation on a Magnetic Lifting Machine.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

FEA Simulation of a Sheet Metal Stamping Process with new format geometries

This nonlinear static analysis shows the sliding of a rubber seal on a rigid body due to applied displacement.

This study aims at validating the CHT v2 solver of SimScale GmbH with IBM as an option. A peer-reviewed publication focusing on thermal analyses and cooling of an RF electronics package has been used as the basis for this validation case.

This tutorial case shows how to perform an external flow analysis of a Car.

This project demonstrates the validity of the CHTv2 and IBM solver. through a Conjugate Heat Transfer (CHT) analysis of a battery pack.
 
Validation Experiment Reference:
A peer-reviewed publication on battery pack thermal validation  has been used as basis for this study (with reasonable assumptions and approximations): 
https://www.mdpi.com/1996-1073/10/8/1157

Example project on how to export a deformed shape in Paraview

Study of CO contamination inside a car park

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

This tutorial teaches how to run a transient incompressible flow simulation using the Subsonic analysis type in SimScale using the AMI rotating zone on a Francis turbine.

In this project, a multiphase flow analysis of a globe valve is performed.

Conjugate heat transfer simulation tutorial with U-tube heat exchanger.

Step-by-step tutorial for a mesh creation of an F1 front wing model, using the Hex-dominant parametric approach.

CFD (blood flow) simulation of a Carotid artery in normal and blocked scenarios.

Transient wind comfort study using the Incompressible LBM solver.

This is a validation case of a pipe flange under the effect of bolt preload. The aim of this test case is to validate the Bolt preload boundary condition.

Geometry for the enclosure snap fit tutorial.

Follow this step-by-step tutorial and set up a nonlinear structural simulation for a snap-fit closing process of a plastic enclosure.

This tutorial shows how an incompressible turbulent airflow around a Formula Student vehicle moving in a straight line can be simulated.

This project simulates the reattachment phenomenon over a backward-facing step.

This project simulates compressible turbulent flow through a de Laval nozzle.

Tutorial showing the workflow for nonlinear FEA structural analysis, including varying load, hyperelastic material and elastic support.

In this project, the local mean age of air (LMA) within a room is calculated. The SimScale results are compared to the experimental results reported by Martin et. al

Validation case for the structural analysis boundary condition for bolt preload, with the case of a pipe flanged connection.

In this example, we will create a template for an IGBT Cooler using NS_ Tags. We will then use the template in order to simulate a different variant of the IGBT Cooler.

Public Profile

simscale's profile