SimScale CAE Forum

Using SimScale


CAD & Meshing Questions and discussions related to CAD model upload, CAD model preperation and Meshing. Thermal Questions & discussions related to the behavior of your application under the influence of thermal effects. Post-processing Questions and discussions related to post-processing using the SimScale online post-processor or ParaView Solid Mechanics / FEA Questions and discussions FEA / Solid Mechanics/ Structural Mechanics Fluid Flow / CFD Questions and discussions related to CFD / Fluid Flow
A Collection of SimScale Resources [Using SimScale] (8)

For those of you who are new to SimScale (or new to our forum), I wanted to create a collection of resources to make getting started a little easier. Have a look around and happy simulating! What is SimScale SimScale is…

About the Using SimScale category [Using SimScale] (1)
Flow Volume Extraction Issues [Fluid Flow / CFD] (5)
Layering for yPlus of less than 1 ( 2 ) [Using SimScale] (23)
Help with simulation [Using SimScale] (2)
Meshing time on Fsae first webinar [Using SimScale] (6)
Documentation Error [Using SimScale] (2)
Mesh Generator troubles [Using SimScale] (2)
Nothing loads in Solution Field view [Using SimScale] (10)
Measuring flow through an internal face [Fluid Flow / CFD] (6)
Density based compressible simulation? [Using SimScale] (5)
Upload mesh data to Simscale? [Using SimScale] (2)
Cad moddelling [Using SimScale] (5)
Difficulties when creating a aerodynamic analysis [Fluid Flow / CFD] (3)
Mixing Tank: How it is possible? [Fluid Flow / CFD] (3)
How to set boundary conditions for stl geometry [Using SimScale] (3)
LakeTemperatureDistribution [Using SimScale] (11)
Choosing the right numeric settings [Thermal] (2)
Step by Step Tutorial: Analysis of snap fit buckle [Solid Mechanics / FEA] (6)
How to solve this simulation'problem [Thermal] (4)
CFD Spinning Looping Boomerang , Shape Optimisation for Maximum Time on Longest Trajectory [Fluid Flow / CFD] (6)
What the problem of this convergence plot of the simulation? [Using SimScale] (3)
Select a simulation model after open inner region [CAD & Meshing] (2)
Porous media [Using SimScale] (6)
Gauge Pressure initial condition vs Pressure Outlet [Fluid Flow / CFD] (2)
Standard Simulation but Particle Traces Curve Strangely [Fluid Flow / CFD] (3)
How to calculate the required SimScale Inlet velocity and Air property values in order to match Mach and Reynolds Numbers of wind tunnel conditions [Using SimScale] (2)
Air flow in the box [Fluid Flow / CFD] (7)
Creating Particle Trace Animations in SimScale [Fluid Flow / CFD] (4)
Simulation result look like this [Using SimScale] (2)