Free simulation and validation templates using SimScale's cloud-based CAE platform. Sign up, explore thousands of public projects, and get started today! | Page 24

nvfdiaohbioFnkgfns - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy

Analysing thermal properties by simulation

Simulation of airflow around building using CFD

The results of this SimScale validation case of a centrifugal pump are compared with the results of the study by WANG Xiu-yong and WANG Can-xing entitled Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation.

The SimScale Multi-purpose solver was used. - Copy

The solid phase is to be made of stainless steel (k=15W/m-K) and the fluid of air (k~1.2 W/m-K).

compresion ciclica (ahuellamiento une 12697 - 25) - Copy - Copy - Copy - Copy

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

This piece acts as part of the support of a motor engine

Compare stress in solid vs. lattice-structured implants.
Geometry:
•	Implant dimensions: 0.15 m × 0.02 m (diameter).
•	Lattice structure: Gyroid (50% porosity).
Material: Titanium (E = 110 GPa, ν = 0.33).
Boundary Conditions:
•	1 kN compressive load simulating body weight.
•	Fixed support at the distal end.
Analysis Steps (SimScale):
1.	Static structural analysis.
2.	Homogenize lattice properties (simplified model).
3.	Compare stress and weight reduction.
Deliverables:
•	Stress distribution in lattice vs. solid.
•	Weight reduction percentage.
Validation: Compare with experimental data on lattice compression.

Semi-Static Load for Balls within the screw chamber

A simulation for a headlight Intake I made

파도가 있는 상황에서의 6자유도 운동 분석과 부가저항계수 도출

Public Projects