Compressible

Find projects using the compressible analysis type here. | Page 1

I am going to see how the airfoil that I made in Fusion 360 will react to air - Copy

I'm trying different versions of the cyclone. Perhaps it will be easier to manufacture. Minimum parts. Everything can be printed out. - Copy

Measurement of the lift coefficient and drag coefficient at a certain angle of attack. - Copy

Simulate flow around the diffuser configuration

Stresses seen at leading edge of win turbine blade

This project aims to find out the effect of the blended wing on the performances of the aircraft and to optimize the design of the blended wing. For this project compressible type of simulation has been chosen because the aircraft with blended wing body moves at high velocity - Copy

Checking how the input radius of the cyclone affects the circumferential velocity at the outlet - Copy

This is a case that year 3 student (2024) Ethan Nadar requested that I run for him.  Delta wing geometry with 30 degree sweep. Mach 1.6.

Verification model of compressible flow for pressure ratios up to 8 - Copy

Checking how the input radius of the cyclone affects the circumferential velocity at the outlet

This is my first academic  Compressible flow CFD Simulation - Copy

This will cover research study of the SU-57 Flight Dynamics:

Drag,
Lift,
Stalls - Copy

M2.5R Ramjet engine test (Entire engine) - Copy - Copy

Pipe flow analysis of different sized tubes at different angles in a T junction - Copy

Find where the boundary layer starts separating from the upper surface of the wing profile

Fluid dynamics simulation for Celsius-1 rocket. Thanks for the sponsorship Simscale :)

Compressible | SimScale Project Library | Page 1