Free simulation and validation templates using SimScale's cloud-based CAE platform. Sign up, explore thousands of public projects, and get started today! | Page 25

thermal simulation to analyse fluid flow,temperature distribution,heat flux,thermal stress and expansion and heat transfer - Copy

hello world this text is simply here to fill space this is a test object used to evaluate this software of its capabilities

It is a robot. I want to use a static simulation to locate pressure points to help in weight reduction.

Model residual stress in an aluminum casting during cooling.
Geometry:
•	Casting: 0.3 m × 0.2 m × 0.1 m.
•	Sand mold (insulated boundary).
Material: Aluminum (E = 70 GPa, ν = 0.33, α = 24e-6/°C).
Boundary Conditions:
•	Initial temperature: 700°C (casting), 25°C (mold).
•	Natural convection (h = 10 W/m²•K).
Analysis Steps (Simulia/Abaqus):
1.	Transient thermal analysis (cooling over 1 hour).
2.	Sequentially coupled stress analysis.
3.	Account for phase change (latent heat).
Deliverables:
•	Residual von Mises stress after cooling.
•	Temperature gradient history.
Validation: Compare with empirical data for similar castings.

subestacion de traccion elevada metro de Panama

water cooling form induction heating ss metal

Simulation of diflection of cantileaver beam

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy - Copy

Public Projects