SimScale CAE Forum

Welcome! - Introduce yourself :)

Hey JR, nice to meet you and a warm welcome from the SimScale staff as well as from my side! :slight_smile:

Well, congratulations - you’re at the right place to start or continue with your CFD voyage :slight_smile:

I would advise you to browser the public projects section as well as the forum a bit to see how everything works, I am happy to help if you need anything. First and foremost I would have a look at the projects from our PowerUsers @yosukegb4 & @pfernandez which you can find here which is exactly what you are looking for:


Happy SimScaling!

Jousef

Hello, I’m Sandeep Patil working in OpenFOAM since 6 years now, trying to learn available physics in OpenFOAM. I believe I got enough experience to help answer the questions in the forum. I have been working in the projects and product development based on OpenFOAM for quite a long time. Recently I have worked upon cases with Overset/Chimera Grids, Solar Radiations, Fire Modelling and Multiphase with Heat Transfer Modelling to get the best practices.

I hope I will be beneficial to the members for their queries.

1 Like

Hi everyone,
my name is Luca, i’m from italy and i’m a mechanical engineer, i would like to learn someting about the CFD simulation for rudder sailboat design, becausa i’ve some experience in CFD field only as far as the simulation of heavy duty compressor is concerned, i hope to learn a lot because sail is one of my great passions! Tho second one is related to the simulation of drones with counter-rotating propellers, and i would like to study them from a technical point of view.
i hope to improve as much as possible my competences,

best regards

Luca

1 Like

Hello everyone, This is Mohamed Zaid from Melbourne, Australia. I have completed my Bachelor of Mechanical Engineering (1st class honours) from Royal Melbourne Institute of Technology.
Over a 2 years of having expertise in all aspects of fluid mechanics and heat transfer applied to projects through out Australia. I had use Simscale platform in my previous company and had a big applause to Sam and Jon for taught me the basic Simscale setup

2 Likes

Hi all, I am a mechanical engineer from Israel and I am trying out simscale as an alternative to autodesk simulation CFD. So far I really like it.

1 Like

Welcome to SimScale Sandeep!

Having 6 years of experience in OF definitely helps - you should consider becoming a PowerUser! :wink: We are very happy to have such a guru on board and hope that you can help our users and interact with the community in general!

Really looking forward to see some great input from you!

Jousef

1 Like

Hi Luca and thanks for your introduction :slight_smile:

Glad you are at the right place to get your CFD journey started! :wink: As you might have already seen, I posted an answer to your question with some guides that can help you along the journey: CFD simulation for a sailboat design - happy to have you on board as well!!

Jousef

Hi Mohamed!

Thanks a lot for introducing yourself :slight_smile: I am really looking forward to see what you can bring to the community but also can learn from other users but also SimScale to extend your knowledge in the field of CFD but also FEA as well as thermal analysis :slight_smile:

Happy SimScaling!

Jousef

1 Like

Hey @roy_g and a warm welcome from SimScale! :slight_smile:

Let us know what you think about SimScale and post your great ideas right here: SimScale’s Feedback Section.

Happy SimScaling and feel free to contact me if you need anything!

Jousef

1 Like

Thank you very much Jousef!!

1 Like

Aloha,
Pablo from Argentina here,
I really new to CFD, I am a Biotechnologist, who is specializating in water and wastewater engineer, I am interested in Biological Process in this Engineer Area.
I arrived here, since I started to use Onshape for my Master in Sanitary Engineer Tasks, etc.
Actually I am working on a Full Mixed Aerated Lagoon, and triying to get a CFD model of it,
Hope I can learn how to do this correctly, and learn a lot from you, as I seen there are many specialist in the area here =).
Thanks for reading,
Good Luck with your projects,

Pablo

3 Likes

A warm welcome to SimScale Pablo :slight_smile:

Let us know if you have any questions or ideas! I am sure you will be very helpful to our community with your background but can learn a lot from us as well :+1:

Happy simulating & simscaling!

Jousef

1 Like

Hi! I’m passionate of CAD. I’m studying computer science and hope to share with you a lot of knowledge.
See you!!

3 Likes

Happy to have you on board @jmart_nez_garc!!

Feel free to browse our forum and reach out to the PowerUsers or me if you need any assistance.

Happy SimScaling!

Jousef

Hi all. Nice to be a part of this community!

3 Likes

Hey @muve,

Welcome to the community!
If you run into trouble during your simulations, feel free to post your project in the support section for assistance. You can also browse through public projects for inspiration :stuck_out_tongue_winking_eye:

1 Like

Also a warm welcome from the whole SimScale staff and myself! :slight_smile:

Jousef

Hello Everyone!

I am Alberto, from Italy.
I am evaluating SIMSCALE on some technical problems in flue gas distribution, to understand if it will be our next tool to be included in the Technical Department.
I would be happy to understand the basics and be quite confident on running simulation on my own.
I am not expecting to get a top-edge result as, for the moment, we don’t have any benchmark to compare our results.

2 Likes

Hey @albet and a warm welcome to our community :slight_smile:

I will write you a private message to discuss this with you in a bit more detail.

All the best!

Jousef

1 Like

Hello everyone. My nwme is yusuf fromm Nigeria .i just concluded my bachelor’s in engineering program in mechanical engineering discipline… I’m currently on a reserch work for a project tittled pilot scale solar dryer in which i would use CFD as a major working tool. I’m looking forward to learning a bunch from you guys here. Enjoy!!

5 Likes