Could someone please check if this cad model used for this simulation is ok?

Project Support
1

Hi I was wondering if this cad model used for this simulation is cleaned up enough to get a good simulation run and a good mesh becuase I’m going to restart my project run and create new meshes for everything. Here is the link: https://www.simscale.com/workbench/?pid=943970434838043500&mi=spec%3A6b43c668-3988-4470-9119-ecc6c843eae1%2Cservice%3ASIMULATION%2Cstrategy%3A3&ps=analysis%2FIncompressible--oneOf%2Fmaterials%2Ffluids%2F0

Thank you so much for your time, help, and effort,
Frank
Lucci

2

Hi again Frank!

This is a STEP file, which is great. I see no issues with the model, however I would suggest you simulate the half of it, as it seems to be symmetrical with respect to the plane which is normal to the X-axis.
By the way, this guide could be useful when it comes to future simulations: CAD Preparation & Upload | Simulation Setup | SimScale

Best regards,
Fillia

3

Thank you