Set up your own cloud-native simulation in minutes.Start Simulating Now
MOSFET on 'infinite' heatsink
647
2
Statistics
3 Geometries
2 Meshes
2 Simulation setups
5 Results
3 Geometries 2 Meshes 2 Simulation setups 5 ResultsAbout this project
A CHT simulation of a generic PLUSPak247-cased linear Power MOSFET on a near 'infinite' heatsink (1m x1m x 0.1m, high thermal conductivity of 1e+6W/m.K). The 10mm x 10mm x 0.2mm silicon die (chip) is bonded to the copper tab with a bonding material of similar dimensions whose thermal conductivity is then empirically adjusted to make the overall Tjc equal to 0.12W/m.K. The model MOSFET 2can then be used in a subsequent simulation of 6 or 8 devices on a forced-air cooled finned and enclosed heatsink.
