SimScale simulation projects by irving | Page 1

irving's profile

testing a c-beam extrusion for displacement under load

Examine forces in bending a 1.5mm sheet of Alu-1050 with a mild steel bending brake

A CHT simulation of a generic PLUSPak247-cased linear Power MOSFET on a near 'infinite' heatsink (1m x1m x 0.1m, high thermal conductivity of 1e+6W/m.K). 

The  10mm x 10mm x 0.2mm silicon die (chip) is bonded to the copper tab with a bonding material of similar dimensions whose thermal conductivity is then empirically adjusted  to make the overall Tjc equal to 0.12W/m.K.

The model MOSFET 2can then be used in a subsequent simulation of 6 or 8 devices on a forced-air cooled finned and enclosed heatsink.

This is a test simulation of pressurising a simple silicone rubber 'bullet' to determine how to set simulation parameters for more complex models.  Specifically, how to get simulations using the boundary condition 'follower pressure' to work reliably.

Public Profile

irving's profile