SimScale simulation projects by Anware | Page 1

Anware's profile

SimScale validation against the experimental results provided by the Architectural Institute of Japan (AIJ), using AIJ Case C.

Centrifugal pump curve generation using CFD

Cavitation investigation study of Centrifugal pump.

a comparative study of heat transfer of stove

The full published research article of this project is available at: https://doi.org/10.46873/2300-3960.1063

The effect of numerics on the simulation quality and convergence time.

study of AOA effect on airfoil performance

This project prepared to see the transportation of passive scalars (airborne infection) of a case study of St. Peter TB specialized hospital airborne infection isolation room.

prostheses are intended to restore a degree of normal function to amputees. Mechanical devices that allow amputees to walk again or continue to use two hands have probably been in use since ancient times, the most notable one being the simple peg leg.

CFD Professional Training Exercise 4-Tank filling multi-phase

This project is aimed at creating a parametric analysis of heat distribution within a 3D printer.

CFD Professional Training Exercise 3- Compressible Turbulent flow through a valve

This project demonstrates the usage of rotating zones

finite element analysis of a drone arm design

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

Exercise for Session 4 of FEA Professional Training: Dynamic analysis with SimScale. 
To register for professional training, please follow this link: https://www.simscale.com/professional-training/

In this project basics of conduction, convection and radiation are demonstrated.

Exercise for Session 5 of FEA Professional Training: Advanced Concepts in Structural Mechanics on SimScale. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Handout project for the Sports Aerodynamics Workshop : Homework for Session 1 
(27th March 2017 )

Convergence analysis for different situations: Notched plate, incompressibility, shear locking during bending

Target: To find the maximum flow with minimum levels of vibration for the cross flow fan. This is a sample project to show the air flow for particular vibration experienced by the fan. Design changes needs to be made to narrow down to the best design

Static Linear and Nonlinear Analysis of a truck underrun protection

This project is the starting point for the homework for Session 1  of  the Baja SAE workshop. It enables the user to analyse the plastic deformation in an All Terrain  Vehicle (ATV)  Suspension .

the flow gas of two boiler flow throw in on medium

Udemy Drone propeller aerodynamics Exercise

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

This project aims to study wind comfort and safety for case study newly developed for Wollo tertiary care and teaching Hospital Master  plan using CFD

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Project for Exercise 1 of FEA Professional training exam. To register for the training, please follow this link: https://www.simscale.com/professional-training/

Public Profile

Anware's profile