Result in vtk file

[daniel11]

Hello

What I can do with the VTK file ?

Dan

[ahmedhussain18]

Hi Dan!

You can use this file to post-process your result in Paraview locally. To download Paraview, go to www.paraview.org.

For the tutorial for FEA analysis postprocessing both on online and local post-processor, you can see the following forum post:

FEA post-processing guide (using online post-processor and local Paraview)

“However beautiful the strategy, you should occasionally look at the results.” - Winston Churchill Thus results are one of the most important part of any simulation. One can’t simply accomplish his/her simulation mission without properly post-processing the results. Therefore, this post shows how to post-process the solid mechanics simulation results using both the online post-processor and local ParaView. So let’s get in to it! Similarities between both post-processors Before we start, let’s…

For online CFD post-processing, please see this:

CFD Post-Processing Guide for SimScale

In this post we will show how to use SimScale online post processor for CFD simulation post processing. We will use the project “Aerodynamic of F1 Race car”, import the project by clicking at this link. The project contains an incompressible steady state run which will be used for post processing. Instructions Once simulation run is finished (the progress bar turns green) then click on the Results and select Post-Process results. [image] Immediately you will be moved to the Post-Process…

I hope this helps. If you have any question/s, feel free to ask.

Best,
Ahmed