Improving Y+/Mesh help

I’m working on a project testing out different Gurney Flap heights, I’ve been having trouble with my Y+ value in sims, The goal is for the whole wing to have a Y+ value of 1 or at least very close to it. I made the calculations for what my first layer size should be and had successful runs but with an ok Y+ value. So I decide to make runs cutting the first layer in half but the sim always fails, SimScale tells me the mesh quality near the wheel needs refinement but I’m not sure what I could do. Would really appreciate the help.

https://www.simscale.com/projects/NitroAero/gurney_flap_sims_1120091678