Hi everyone, I have an issue when I’m trying to upload my own geometry on SimScale. After combining multiple .stl geometry files with the “cat” command in Linux, I try to upload the combined.stl on SimScale. Even though the upload is successful, only one of the previously individual .stl files is s…

Hi @pmparitakis ! Can you share the file with us - Google Drive link or something similar works. The staff will have a look at it asap and see how we can fix this issue so that you can continue to work on your project. All the best! Jousef

Hi @pmparitakis I’m away from my laptop atm but have you tried opening in paraview ? If it’s something post generation it’ll tell you which lines are at fault, if it is a fault from software load in each individual file from the combination to see which one is at fault. Just an idea :slight_smile: K…

Hi @jousefm , @1318980 ! Thanks for the replies. Here’s a link to the individual .stl files corresponding to the rear left & rear right tires of the model. And here’s a link for the combined .stl of those two individual files. Let me know what you think and thanks in advance :slight_smile:

Hi @pmparitakis , if you search for ‘solid’ in the text file the lines between the solids read: endsolidsolid P18_RRTire Should be: endsolid P18_RLTire solid P18_RRTire After altering this and loading in paraview I get no errors. Hope this helps, Darren

Thanks @1318980 , your suggestion solved my issue. Do I have to do this every time I try to combine multiple .STL files together using the “cat” command? Is there anything else I can try in order to avoid correcting the merged .stl file in the end? Thanks in advance!

Hi @pmparitakis , normally that isn’t an issue but it must have been missing the new line. I have created a python script if you are comfortable using python? you could try it and see if it is better, if not just add in a newline in the script to correct it. If so ill link it to you. Kind regards, …

Thanks @1318980 for the reply. Does the python script correct the already merged file or you can do the merging of multiple .stl files without getting the error I got? In any case, I’m comfortable with Python and I would be more than happy to test the python script, if you are willing to provide m…

Hi @pmparitakis , no not correct just use it instead of. It takes each file, copies over the lines and where there is a ‘solid’ it changes the name to the file name. If this doesn’t fix your issue you can simply put ‘\n’ on the end of the ‘ensolid’ line (which is already in the script). I’m still awa…

Thank you @1318980 ! I look forward to testing the script.

SimScale CAE Forum

Combined.stl upload problem

Using SimScale CAD & Meshing

1318980 February 13, 2018, 7:05pm 11

https://1drv.ms/u/s!AmmuZY9R6wFaiLZJI3ZKXC4UzKrJng

Here you go @pmparitakis let me know how it goes.

4 Likes