Free simulation and validation templates using SimScale's cloud-based CAE platform. Sign up, explore thousands of public projects, and get started today! | Page 3

In this project a transient thermo-structural analysis of a spherical pressure vessel is demonstrated.

In this project demonstrates the pressing of a rubber assembly. 

Original project of @jgonz

This project shows the stress analysis of a rocker bike part.

Outrigger bending test - Original project of @dakalio

2 body heat transfer - Original project of @bgeswein

This project shows the dynamic response of a damped spring mount system after the applied pressure is released.

Pre-stressing of the bolt is demostrated.
Original project of @potyka_csaba

In this project snap fit simulation is performed

Original project of @mlarreta

Bend plate Y 0.02m modal analysis.

Original project of @kaz_puttenaers

In this project, can knockdown is simulated.

Exercise for Session 4 of FEA Professional Training: Dynamic analysis with SimScale. 
To register for professional training, please follow this link: https://www.simscale.com/professional-training/

In this project basics of conduction, convection and radiation are demonstrated.

This project shows the nonlinear static analysis of a bridge elastomer bearing pad.

This project shows the stress analysis of a pressure relief valve (PRV) under operation.

This project shows the transient thermal analysis of chips mounted on a printed circuit board (PCB).

Solving meshing problem - original project of @tcushing.

This project simulates the crossbar impact of David Beckham's fastest kick clocked at 97.9 mph - 157.6 kph.

This project demonstrates the analysis of a mechanical arm using all available structural solvers on SimScale.

This project involves the simulation of stress analysis of an aircraft wing. There are total 6 comparison configurations with 3 different models and two different load definition.

In this project, thermal stress analysis of polymeric photo-thermal microactuator was performed considering different bending angles and arm widths.

This project was done in order to investigate structural integrity of the designed clamping mechanism.

Original project of @vnguyen.

Heat Transfer Analysis of burner - original project of @jopoy

This project demonstrates the stress analysis of femur bone subjected to different amounts of load.

In this project a dynamic linear analysis of a beam with material damping is demonstrated.

This project demonstrates full-fledged working of a car monoshock wishbone suspension system.

This project shows the pressure vessel thermomechanical analysis - original project of @javal_ipr_ext

This project shows the thermostructural analysis of basket strainer.

In this project vibration analysis of jet engine is performed.

This project validates the elastic support functionality on SimScale platform.

In this project, impact analysis of a football on a goal post was performed.

Transient heat transfer in a frying pan - original project of @vgullapalli

Project to visualise  polymer egg displacement under internal pressure load

Original project of @tbruneton

This project demonstrates the hip joint prosthesis for the femur bone. Several types of materials are tested for the hip joint in this case including Co-Cr-Mo on Ti-6Al-4V, Co-Cr-Mo on UHMWPE and Concrete on Concrete.

In this project the shrink fit analysis of tool holder is performed.

Single Hook snap fit analysis - original project of @fbernhardt

This project demonstrates the benefit of using modal dynamic analysis case over a simple linear dynamic analysis case.

This project is done in order to compare the results obtained using modal dynamic solver to the one produced by standard transient dynamic solver.

This project shows the thermo-structural analysis of a pressure vessel with temperature-dependent material properties.

In this project, nonlinear contact analysis of Cherry MX keyboard key is performed.

This project performs the nonlinear static equibiaxial tension of a cube.

This project shows the bending of copper wire done through a rolling process.

This project shows the frequency analysis of the truss bridge for first 20 eigenmodes.

bars test - original model or alistardean

This project demonstrates the static stress analysis of three aircraft engine bearing bracket models considering both linear and nonlinear material definition. The models used in this analysis are taken from GrabCAD users who were the winners of GrabCAD 'Airplane Bearing Bracket Challenge'. The models are tested with horizontal and vertical loading conditions as provided on the challenge page of GrabCAD.

Exercise for  Session 1 of Thermal Professional Training: Fundamentals of Thermal Simulations. To register for professional training, please follow this link: https://www.simscale.com/professional-training/

Public Simulation Projects Library | SimScale | Page 3