Conjugate Heat Transfer (legacy)

Conjugate heat transfer (legacy) has been replaced by Conjugate Heat Transfer v2.0 and will shortly no longer be available for use. You can only see it here as you have been granted access based on an exceptional condition. Therefore we strongly recommend to use CHT v2.0 as a default and consult with your simscale support staff if you feel Conjugate Heat Transfer (legacy) is required for your application. | Page 1

Heat Transfer Analysis of a Spiral Heat Exchanger: In this project Conjugate Heat Transfer Simulations were performed to find out temperature distribution inside the heat exchanger. From the temp. distribution, outlet conditions were obtained to evaluate the effectiveness of this particular configuration. - Copy

simulating a  Fluid Flow and various tempetaure prone - Copy

This project aims at validating the heating capacity of the HVAC system of a 3 story residential building, the indoor air quality design, and the thermal comfort in winter conditions and summer conditions - Copy

Heat Transfer Analysis of a Spiral Heat Exchanger: In this project Conjugate Heat Transfer Simulations were performed to find out temperature distribution inside the heat exchanger. From the temp. distribution, outlet conditions were obtained to evaluate the effectiveness of this particular configuration. - Copy - Copy

Conjugate heat transfer simulation tutorial. - Copy

Projet de refroisissement du NId TLe - Copy

Mixture different temperature fluids - Copy

The presented project is an analysis of the thermal performance of a heat sink connected to chip. The chip acts as a power source generating 30W of heat. Using a conjugate heat transfer analysis allows for simulation of heat transfer between the solids via conduction and the dissipation of heat into the ambient fluid via convection. The components are cooled passively and buoyancy effects  drive the flow in the surrounding air.

The objective of this project is to evaluate the max temperature of the chip during operation and therefore a steady state analysis was carried out. - Copy

This project includes the shell and tube heat exchanger simulation using the conjugate heat transfer technique, abbreviated as CHT. Conjugate heat transfer defines processes which involve variations of temperature in solids and fluids due to thermal interactions. - Copy

Modélisation numérique de réchauffement d'une enceinte

Thermal comfort study of multi story building - Copy

Electronic cooling is a vastly important topic, as failure to sufficiently cool a component within a system will lead to overheating, reducing the component's lifespan or in severe cases damaging the component.

Water cooling is a great option for higher power application, and this webinar will demonstrate how CFD can be used to ensure that there is sufficient cooling, and how to ensure its efficiency within a system. - Copy

This project aims at validating solar simulation

simulating a  Fluid Flow and various tempetaure prone - Copy - Copy

Simulate the flow inside the shell and tube heat exchanger - Copy - Copy - Copy

Thermal analysis with specific conductance - Copy

Conjugate Heat Transfer Webinar - Copy test

Conjugate Heat Transfer (legacy) | SimScale Project Library | Page 1