Compressible

Find projects using the compressible analysis type here. | Page 8

Evaluate Different Mixing Tee Scenarios with CFD - Copy

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight. - Copy

3.	Robot gripping the tray, tray horizontal and aligned to the hopper, screw feeder in the process position, cabinet doors SHUT

studies of propierties of boeing 787 - Copy

Demo CFD analysis of air flow around a sphere with flow velocity of 100 m/s - Copy

CFD Simulation will be performed on multi wing airplane in order to determine the aerodynamics on it.

CFD simulation for paste inside the tank being extruded via pressurized balloon

An air flow bench is a device used for testing the internal aerodynamic qualities of an engine component and is used primarily for testing the intake and exhaust ports of cylinder heads of internal combustion engines, but the cost of flow bench is very high and thus, with the advent in computational simulation technology the port flow simulation can be conducted very easily to analyse the breathing capacity of the engine. - Copy

This tutorial aims to showcase how to set up a compressible analysis. An aircraft wing geometry is used. - Copy

To know the effect of roughness similar to drag cause of biofouling in plat