Compressible

Find projects using the compressible analysis type here. | Page 3

quick test to evaluate the effectiveness of a preliminary design

AIR FLOW FROM 2 INCH TO RECTANGULAR OPENING

the goal of this project is to simulate the air flow of the cooling duct.

the goal is to simulate the airflow of the fan duct of this toolhead

the goal is to test the improved version of the fan duct

3.	Robot gripping the tray, tray horizontal and aligned to the hopper, screw feeder in the process position, cabinet doors SHUT

This project involves meshing externally a Boeing 777-200 LR Aircraft, and then simulating its' operation on flight facing an airflow with an axial velocity of 50 m/s.  It is one of the longest-range commercial airliners, with an exterior length and wingspan reaching 63.70 and 64.80 meters respectively.  For this case a model with removed engines was chosen in order to assist convergence and meshing. Also a Symmetry plane was added midst the Part, and half the part was used for meshing and simulation for simplification.  A steady state compressible flow simulation is executed to visualize the air flow around the bodywork and wings of the aircraft, as well as the pressure distribution while on flight. - Copy

Compressible | SimScale Project Library | Page 3