Set up your own cloud-native simulation in minutes.Start Simulating Now
LED Water Cooling - Copy
363
0
Statistics
5 Geometries
2 Meshes
1 Simulation setup
1 Result
5 Geometries 2 Meshes 1 Simulation setup 1 ResultAbout this project
This simulation aims a determining whether the temperature of the board of 2x 160W COB Series UV LED is below the recommended temperature of 40C with a water cooling block running with 0.2m/s inlet velocity. 3D model from Philippe Cavalier (https://grabcad.com/library/water-cooling-led-heatsink-1)
Related Projects
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
by TemplatesTemplates
by TemplatesTemplates
