Hi,
Really interesting concept!
I’m no expert at this, but I saw the project and found the following about your latest simulation “Semi-simple New Model”-
- Inlet velocity of air through ceiling ducts is set to 100 m/s which is extremely high for an indoor simulation. A realistic value would be 0.5 m/s.
- Inlet velocity of Scalar species is not properly oriented ( x = 1, y = 1, z = 0). You may want to properly orient velocity vector(normal to inlet face) to get good results.
- In this simulation, you haven’t set the scalar species input correctly. Passive Scalars Value was never set to 1.
Still, Iso volume works. You’ll see some results with the following settings
