In Creating a Standard Mesh on a Heat Sink | Tutorial | SimScale at section “3. Standard Mesh” I read: “Automatic boundary layers generates layers automatically on all no-slip walls, based on the boundary conditions set by the user;” So I thought I do not need an “Inflate boundary layer 2” in my Me…

I now did the correct test! So if I yes/no specify a “Boundary condition” Wall or yes/no default “Inflate Boundary layer”. all results are the same. [image] jjansman: “Automatic boundary layers generates layers automatically on all no-slip walls, based on the boundary conditions set by the use…

SimScale CAE Forum

Automatic boundary layer

Using SimScale

igaviano November 28, 2024, 4:35pm 9

No worries @jjansman! Thanks for sharing and glad that the issue is solved.

Cheers