Set up your own cloud-native simulation in minutes.Start Simulating Now
234
0
2 Geometries
2 Meshes
2 Simulation setups
0 ResultsIn this simulation, it is aimed to calculate the drag coefficient of an experimental rocket. Although the rocket geometry used is representative, the drag coefficient can be calculated for realistic models by following the simulation steps. K-w SST turbulence model was used for simulation. For the experimental rocket, the speed was taken 270 m / s and a ninety-degree (not realistic) flight angle assumption was made. - Copy
by slilbaekslilbaek
2 Geometries 2 Meshes 2 Simulation setups 0 ResultsIn this simulation, it is aimed to calculate the drag coefficient of an experimental rocket. Although the rocket geometry used is representative, the drag coefficient can be calculated for realistic models by following the simulation steps. K-w SST turbulence model was used for simulation. For the experimental rocket, the speed was taken 270 m / s and a ninety-degree (not realistic) flight angle assumption was made. - Copy
karaselvi created this project
over 6 years ago
vishwajitp9955 copied this project
about 3 years ago
