Looking for project simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Combining flow between separate inlets in a T-junction

Find the deflection of model, based on reaction force

It is a practice simulation before doing actual simulation of greenhouse. Generally, it is a testing on how simscale generate simulation. Actual testing will be done after I familiarize or I'm knowledgeable enough to do our simulation.

Microchannels and micro flows are used for cooling of turbine blades.

The engineering challenge is to predict how well the finished product will perform under real-world working conditions.
This involves considering stresses and deformation as well as a range of failure criteria. 
honeycomb Core is used in many applications like aircraft, buildings, etc.  in this particular simulation a honeycomb core is simulated against static structural by applying a load, pressure on different faces with different conditions such as cantilever or fixed beam.  
A most important analysis of this simulation is finding out of plane elastic modulus. Out of Plane analysis is done by applying load in a particular direction and finding deformation, stress, and strain in that particular direction.  Therefore three different times load is applied in x, y, and z-direction to simulate out plane analysis.  I here have taken two conditions first cantilever beam and the second is a fixed beam.
 It was very easy and interesting to simulate here and the time consumed was even less as compared to other software.

Projeto térmico e hidráulico de um trocador de calor casco e tubos.

Learning project - Oil reservoir problem - Demonstration

Design and Selection of a Pump-Piping System

The main aim of the project was trying to find stress and total displacement on the surface and check with experimental results. In this project, F1 halo is simulated in two different static load condition and for that use SIMULATION TYPE was STATIC. The halo is a driver crash protection system used in open wheel racing series which consists of a curved bar placed to protect the drivers head. The system was introduced in 2015 and became mandatory according to FIA homologation and regulation from 2018.

Simulation of a canti-lever model of a crank arm, to confirm mathematical calculations.

Simulation of the crank arm with a spindle attachment for loading attached.

Projet de réaménagement des sources de potaz Criz