How Leaders are Escaping AI Pilot PurgatoryRegister here
Static Structural Analysis for a Honeycomb Design with different boundary conditions and finding different results such as deformations, stress, strain and many more.
Statistics
1 Geometry
1 Mesh
1 Simulation setup
6 Results
1 Geometry 1 Mesh 1 Simulation setup 6 ResultsAbout this project
The engineering challenge is to predict how well the finished product will perform under real-world working conditions. This involves considering stresses and deformation as well as a range of failure criteria. honeycomb Core is used in many applications like aircraft, buildings, etc. in this particular simulation a honeycomb core is simulated against static structural by applying a load, pressure on different faces with different conditions such as cantilever or fixed beam. A most important analysis of this simulation is finding out of plane elastic modulus. Out of Plane analysis is done by applying load in a particular direction and finding deformation, stress, and strain in that particular direction. Therefore three different times load is applied in x, y, and z-direction to simulate out plane analysis. I here have taken two conditions first cantilever beam and the second is a fixed beam. It was very easy and interesting to simulate here and the time consumed was even less as compared to other software.
565
6
