Explore agentic engineering workflow on SimScaleExperience Engineering AI
Fan Pressure Distributor - Copy
32
0
Statistics
3 Geometries
1 Mesh
2 Simulation setups
4 Results
3 Geometries 1 Mesh 2 Simulation setups 4 ResultsAbout this project
The objective of this simulation is to become familiar with the fan-based Boundary Conditions implemented in SimScale. These Boundary Conditions create a pressure drop on the face applied. This pressure drop depends on the flux going in/out through the surface, and they are related following the charasteristic curve of the fan. Using this Boundary Conditions, different types of fans can be simulated behind the surfaces, and their effects on the different ducts can be estimated. - Copy
