Free simulation and validation templates using SimScale's cloud-based CAE platform. Sign up, explore thousands of public projects, and get started today! | Page 16

verificação dos escoamentos laminar e turbulento

practice first model for heat sink project

believe it or not, this is actually supposed to be a fish

P2 AOA sweep - 2 to 16 degrees - wall func

Simulation of compressible flow inside of the Huzz Large Rocket Motor's Nozzle

Model residual stress in an aluminum casting during cooling.
Geometry:
•	Casting: 0.3 m × 0.2 m × 0.1 m.
•	Sand mold (insulated boundary).
Material: Aluminum (E = 70 GPa, ν = 0.33, α = 24e-6/°C).
Boundary Conditions:
•	Initial temperature: 700°C (casting), 25°C (mold).
•	Natural convection (h = 10 W/m²•K).
Analysis Steps (Simulia/Abaqus):
1.	Transient thermal analysis (cooling over 1 hour).
2.	Sequentially coupled stress analysis.
3.	Account for phase change (latent heat).
Deliverables:
•	Residual von Mises stress after cooling.
•	Temperature gradient history.
Validation: Compare with empirical data for similar castings.

Template for the convergence study course in Coursera - Copy

pump connector mount on steel plate surface , to verify and check the surface thickness is proper or safe.

benchmark simscale solver on complex geometry for structural mechanics
apply top pressure load on large book shelf bracket with fixation at the back, evaluate von Mises stresses


To simulate and analyze fluid flow behavior within a microfluidic chip designed, ensuring laminar flow, proper channel filling, and efficient waste clearance.
Incompressible or Laminar Fluid Flow (CFD)
This microfluidic chip is designed. The chip contains front and back channels, bacterial traps, wells, and connecting bridges. The goal is to simulate the laminar flow of a fluid (e.g., nutrient media or bacterial suspension) through microchannels to validate design functionality, ensure smooth flow, and detect pressure drops, backflow, or clogging zones. The design includes ports for sample injection and waste outlet. Simulation aims to confirm pressure balance and functionality before fabrication.

Public Projects