Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
2 Meshes
1 Simulation setup
0 ResultsSenior mechanical engineering design project comparing a 36-jet impingement cold plate with a 45-channel microfin cold plate for cooling a 700 W GPU heat load. The study uses conjugate heat transfer (CHT) simulations with copper and water, a coolant inlet temperature of 25°C, and a flow rate of 4 L/min. The objective is to compare maximum heater temperature, thermal resistance, and pressure drop under matched operating conditions.
by ahmedhussain18ahmedhussain18
by TemplatesTemplates
by ahmedhussain18ahmedhussain18
by TemplatesTemplates
majdabughazaleh created this project
7 days ago
1 Geometry 2 Meshes 1 Simulation setup 0 ResultsSenior mechanical engineering design project comparing a 36-jet impingement cold plate with a 45-channel microfin cold plate for cooling a 700 W GPU heat load. The study uses conjugate heat transfer (CHT) simulations with copper and water, a coolant inlet temperature of 25°C, and a flow rate of 4 L/min. The objective is to compare maximum heater temperature, thermal resistance, and pressure drop under matched operating conditions.
