Multiphase

This analysis type is used to simulate the time-dependent behavior of fluid mixtures, for example air and water. The analysis is carried out using the VoF (Volume of Fluid) method which is a standard approach for the computation of multiphase systems. | Page 44

the project goal is to design a new modified wet sump for Honda CBR600RR Engine, to prevent oil sloshing baffles  must be used so I need to simulate the motion of the oil in the sump when affected by lateral and longitudinal acceleration.
this project is for Formula Student car

A test to validate results of k-epsilon model

This project simulates the free movement of floating boat under a wave using 6 DOF motion.

Predict the resistance and trim angle of a planing hull.

Test case of 2 fluid with inlet and outlet

Explore flow dynamics inside a stirred tank.

Caracterization of the sloshing in LPG  tank DOT 500L.
I have made a comparison between a LPG tank with breakwater and another without breakwater whit 0.5g of deceleration. The maximum strength magnitude was determined at the first breakwater with 30kN at 0.0057s,

simulazione scolmatore sotto scuola campli

simulate the drain of a conic recipient initially filled with water