Set up your own cloud-native simulation in minutes.Start Simulating Now
2
0
8 Geometries
14 Meshes
12 Simulation setups
12 ResultsCorrected WINTER mode = closed recirculation of 68F/20C indoor return air through the 3.0-in plenum (NOT outdoor 16F vent pre-heat). Geometry: 24x12 ft PV cell, 6 bays, eave supply plenum + ridge return plenum, 10-in round inlet/outlet stubs. One winter validation run before any sweep. - Copy
beda_professor created this project
3 months ago
8 Geometries 14 Meshes 12 Simulation setups 12 ResultsCorrected WINTER mode = closed recirculation of 68F/20C indoor return air through the 3.0-in plenum (NOT outdoor 16F vent pre-heat). Geometry: 24x12 ft PV cell, 6 bays, eave supply plenum + ridge return plenum, 10-in round inlet/outlet stubs. One winter validation run before any sweep. - Copy
