Set up your own cloud-native simulation in minutes.Start Simulating Now
195
5
4 Geometries
5 Meshes
1 Simulation setup
2 ResultsThis project simulates a solid-state relay under a 15W heat load. This relay includes a heat sink that acts as a fixture from the relay housing to the mounting wall. The product is tested under natural convection conditions at 20C. Credits to Xinchao Song for the 3D model used in this project. Link : https://tinyurl.com/ycd6cvug
by TemplatesTemplates
by ahmedhussain18ahmedhussain18
by Jon_WildeJon_Wilde
by anirudh2821998anirudh2821998
by mehmet_oezcanmehmet_oezcan
4 Geometries 5 Meshes 1 Simulation setup 2 ResultsThis project simulates a solid-state relay under a 15W heat load. This relay includes a heat sink that acts as a fixture from the relay housing to the mounting wall. The product is tested under natural convection conditions at 20C. Credits to Xinchao Song for the 3D model used in this project. Link : https://tinyurl.com/ycd6cvug
9fea8551-1ff1-4da1-a8d2-da83edcea07f created this project
over 5 years ago
Templates copied this project
over 3 years ago
