Looking for fan duct simulation templates? Sign up for SimScale and join the largest engineering simulation community in the world! | Page 1

Steady state and transient analysis of an industrial 7 blade fan ducted fan assembly with cowling.

This is a fun duct for Geeetech A10m 3d printer

cfd optimization for a new tipe of fanduct

CFD of a dual fan duct for 4020 radial fans on a custom Q5 effector

A 3D printer fan duct, simulated thanks to SimScale.

CFD testing of my first ever fan duct design

A simple blower nozzle designed to fit the 16x20mm outlet of a 5015 blower common on 3D printers. My blower was measured to have a maximum static pressure of 18 mmH20 and is specified with a max CFM of at least 3. This nozzle is designed to give 15m/s outlet 
velocity at 1.5 CFM  with 14 mmH20 static pressure, which should approximately match the load curve of my blower.

Adapter for 140 mm fan to 120mm Outlet with S shape

Creality CR-10S Dual 5015 fan design for Micro swiss all metal hotend with Bondtech CHT 1mm nozzle

Part-Cooling-6-V7
Ender 3, Phaetus Dragonfly BMS, new fan duct design
distance nozzle to duct: 2mm

ender 5 pro partcoling for fanduct  with two fans

This is an incompressible fluid analysis of coaxially mounted motors in a duct with TVC fins

Blasting a jet engine into a fan duct, I wonder what will happen with the supersonic flow.

Main Duct_300_Before Change

H2D-R with connected to Main Duct size of 300mm with main duct open on the side.

Updated version of the first duct design, for dual 5015 blower fans

CFD flow analysis on mine and Lorenzo's fan ducts for Artillery Sidewinder X1 for E3D volcano and dragon hotend

Mini Kossel hotend mount/fan duct for 2 4020 blower fans

Flow simulation of custom fan duct modified for Volcano

Part cooling fan duct for Anycubic i3 Mega S with E3Dv6 hot end. Updated exit geometry to alter the exhaust angle upward slightly in order to impinge on the bottom of the nozzle ncompared to Rev D v6.

fan duct | SimScale Project Library | Page 1