Set up your own cloud-native simulation in minutes.Start Simulating Now
Venturi_Gas_Irrigation_Analysis
0
0
Statistics
0 Geometries
0 Meshes
0 Simulation setups
0 Results
0 Geometries 0 Meshes 0 Simulation setups 0 ResultsAbout this project
CFD Analysis of Venturi Injector for Gas Irrigation System This project simulates the hydrodynamics of a Venturi injector designed for a gas-assisted irrigation system (FMMO Project). The primary objective is to analyze the velocity streamlines and pressure distribution along the flow path. Specifically, the simulation focuses on quantifying the pressure drop at the throat section to verify that sufficient negative gauge pressure (vacuum) is generated. This validation is crucial to ensure the device can passively aspirate gas into the water stream according to Bernoulli's principle, without the need for external compression.
