Set up your own cloud-native simulation in minutes.Start Simulating Now
362
0
3 Geometries
2 Meshes
1 Simulation setup
1 Result- What is the project goal The project goal is to simulate the three basic modes of heat transfers occurring on a radiator: Conduction through the tube walls, Convention due to water flowing in the tubes and the second convection caused by the air flowing through the radiator. -Simulation type Because of the heat transfer between the solid of the radiator, and the fluid flowing inside, the chosen simulation type is the Conjugate Heat Tranfer. -Project details The fluid that is flowing through the radiator is water. It enters the radiator at 40 degrees celsius at a flow rate of 2.8 kg/s. The air flowing outside the radiator is at an ambient temperature of 19.28 degrees celsius, moving at 0.5 m/s.
pnawane created this project
over 5 years ago
3 Geometries 2 Meshes 1 Simulation setup 1 Result- What is the project goal The project goal is to simulate the three basic modes of heat transfers occurring on a radiator: Conduction through the tube walls, Convention due to water flowing in the tubes and the second convection caused by the air flowing through the radiator. -Simulation type Because of the heat transfer between the solid of the radiator, and the fluid flowing inside, the chosen simulation type is the Conjugate Heat Tranfer. -Project details The fluid that is flowing through the radiator is water. It enters the radiator at 40 degrees celsius at a flow rate of 2.8 kg/s. The air flowing outside the radiator is at an ambient temperature of 19.28 degrees celsius, moving at 0.5 m/s.
