Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
1 Mesh
1 Simulation setup
3 ResultsCross-check of a parametrically pocketed front upright for a sand rail. Geometry: 42 pockets, 12.74 mm plate, E355 steel, 6.69 kg, generated from a YAML spec through KCL. The in-house pipeline (gmsh + CalculiX) reports 134.6 MPa von Mises on the governing case (cornering 1.5 g with lateral load transfer), i.e. 37.9 percent of yield, and a modified-Goodman fatigue safety factor of 1.51 across 15 load-case pairs. This project re-runs the same case on an independent solver to confirm those figures before the part is made.
lucas_measis33 created this project
29 days ago
1 Geometry 1 Mesh 1 Simulation setup 3 ResultsCross-check of a parametrically pocketed front upright for a sand rail. Geometry: 42 pockets, 12.74 mm plate, E355 steel, 6.69 kg, generated from a YAML spec through KCL. The in-house pipeline (gmsh + CalculiX) reports 134.6 MPa von Mises on the governing case (cornering 1.5 g with lateral load transfer), i.e. 37.9 percent of yield, and a modified-Goodman fatigue safety factor of 1.51 across 15 load-case pairs. This project re-runs the same case on an independent solver to confirm those figures before the part is made.
