Set up your own cloud-native simulation in minutes.Start Simulating Now
Static Structural Analysis of A Guiding Frame
411
0
Statistics
1 Geometry
2 Meshes
2 Simulation setups
2 Results
1 Geometry 2 Meshes 2 Simulation setups 2 ResultsAbout this project
In this project, a static stress analysis of a guiding frame is performed. With manual definition of tetrahedral element size, the mesh quality is checked alright. A special material with the property parameters of youngModulus 2.1e5 MPa, density 7850 kg/mm3, and poissonRatio 0.3 is used. Equivalent stress as well as the model's deformation are visualized. The wrapped deformation is scaled with a factor of 80 to differentiate between the deformed state and the original geometry.
