Set up your own cloud-native simulation in minutes.Start Simulating Now
Problem 1 Nozzle
0
207
0
207 0
0Statistics
1 Geometry
1 Mesh
2 Simulation setups
2 Results
1 Geometry 1 Mesh 2 Simulation setups 2 ResultsAbout this project
Using the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s. Doing this problem with two different fluids: water and aire.
Related Projects
Project History
davidps99 created this project