Autodesk Inventor

Find all public projects containing Autodesk Inventor CAD models here. | Page 1

I am going to see how the airfoil that I made in Fusion 360 will react to air - Copy

Comparison of two different cold plate designs for a power electronics enclosure cover. 

The coolant temperature and supply rate are the same for both designs. The trade off in such a design is higher pressure drop vs. more effective cooling.

We compare 2 different versions: A big coolant channel with a version with many pins that drive a more distributed coolant flow.

Trying out Simscale and learning how to do simscale simulations - Copy

Wind Turbine Simulation, Study of Airflow around wind turbine blades - Copy - Copy

comportamiento de un recipiente cilindrico a altas presiones

Testing Rayleigh Benard Convection at different Pr numbers - Copy

Mixture different temperature fluids - Copy

changed angle of fairing under tail - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy - Copy

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation. - Copy

cfd bu - Copy - Copy - Copy - Copy - Copy - Copy - Copy - Copy