Set up your own cloud-native simulation in minutes.Start Simulating Now
448
0
1 Geometry
1 Mesh
1 Simulation setup
1 ResultUsing the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s. Doing this problem with two different fluids: water and air.
aspsenia created this project
over 7 years ago
1 Geometry 1 Mesh 1 Simulation setup 1 ResultUsing the software SimScale, you must design a nozzle, with a 10 cm length, outlet orifice 10 mm, inlet orifice 20 mm, outlet pressure 1 bar, and inlet velocity 10 m/s. Doing this problem with two different fluids: water and air.
