Set up your own cloud-native simulation in minutes.Start Simulating Now
The axial force on the wheel equals the worm’s tangential force: 2 × T_worm / d₁. At stall that is 2 × 0.333 / 0.013 ≈ 51 N, and at design load 34 N. The document lists only the tangential and radial loads. Adding the axial load is slightly more conservative; if you include it, say so in the report.
aabstracts created this project
The axial force on the wheel equals the worm’s tangential force: 2 × T_worm / d₁. At stall that is 2 × 0.333 / 0.013 ≈ 51 N, and at design load 34 N. The document lists only the tangential and radial loads. Adding the axial load is slightly more conservative; if you include it, say so in the report.