Set up your own cloud-native simulation in minutes.Start Simulating Now
Two Phase Bypass Pipe
389
4
Statistics
2 Geometries
1 Mesh
1 Simulation setup
18 Results
2 Geometries 1 Mesh 1 Simulation setup 18 ResultsAbout this project
This is an attempt to model a situation where air is being entrained into a water diversion pipeline. The pipeline is used to divert a small amount of creek flow from one basin to another for hydroelectric power generation. The pipeline entry is near horizontal and then drops off rapidly to 15 percent grade. The goal is to estimate the volume of air entrained in order to size the proper air venting valves.
