Set up your own cloud-native simulation in minutes.Start Simulating Now
Simulation on Initial Geometry channel size 1mmx5mm, 7 channels
393
0
Statistics
3 Geometries
1 Mesh
1 Simulation setup
1 Result
3 Geometries 1 Mesh 1 Simulation setup 1 ResultAbout this project
Validation Case for CHT 2.0 - This project considers the initial geometry of the flow channel inside the cooling plate. The numbers of channels are 7 and the size of each channel is 1mmx5mm. This to compare the results with those from the paper. The simulation is run for 1000s
