Set up your own cloud-native simulation in minutes.Start Simulating Now
508
0
1 Geometry
1 Mesh
1 Simulation setup
3 ResultsApipe with a diameter of0.5 cmand the radius of curvature of0.5 cm. The straight portion of pipe before the bendis 2.6 cmand the straight portion after the bendis 4.6 cm. Air entering the pipe with a mean velocity of4.7 m/sand at a temperature 25 oC whilethe pipe exit pressure is 0 atm.Heating is provided with 119 W/m2 on the surface of the entire length of the pipe.Case 2 (Mod3b.stp)Same flowinvolves an equivalent length of8cm long pipe with the same diameter of 0.5 cm.Fluid properties for air at 2
Fritz created this project
over 6 years ago
by ahmedhussain18ahmedhussain18
by tyrone321tyrone321
by ahmedhussain18ahmedhussain18
by ahmedhussain18ahmedhussain18
1 Geometry 1 Mesh 1 Simulation setup 3 ResultsApipe with a diameter of0.5 cmand the radius of curvature of0.5 cm. The straight portion of pipe before the bendis 2.6 cmand the straight portion after the bendis 4.6 cm. Air entering the pipe with a mean velocity of4.7 m/sand at a temperature 25 oC whilethe pipe exit pressure is 0 atm.Heating is provided with 119 W/m2 on the surface of the entire length of the pipe.Case 2 (Mod3b.stp)Same flowinvolves an equivalent length of8cm long pipe with the same diameter of 0.5 cm.Fluid properties for air at 2
