Set up your own cloud-native simulation in minutes.Start Simulating Now
0
0
1 Geometry
1 Mesh
1 Simulation setup
1 ResultThe goal of the project was to demonstrate the hydraulic jump and find the height of the jump also compare simulation height with the calculated height. For this project, I used a multiphase simulation type (air and water). - Copy
by simscalesimscale
1 Geometry 1 Mesh 1 Simulation setup 1 ResultThe goal of the project was to demonstrate the hydraulic jump and find the height of the jump also compare simulation height with the calculated height. For this project, I used a multiphase simulation type (air and water). - Copy
ROHIT_SR created this project
almost 7 years ago
Anandaazaria copied this project
about 2 months ago
