Set up your own cloud-native simulation in minutes.Start Simulating Now
heat sink
6
0
Statistics
1 Geometry
1 Mesh
1 Simulation setup
2 Results
1 Geometry 1 Mesh 1 Simulation setup 2 ResultsAbout this project
Determine the temperature and heat flux distribution over a heat sink made up of aluminium alloy whose base is attached on the cpu which is releasing heat flux at the rate of 2000 W/m2. In order to cool it a cooler booster fan blows air for which convective film heat transfer coefficient of 20 W/m2-K is maintained.
