SimScale simulation projects by zkakz123 | Page 1

zkakz123's profile

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Define how much heat will be transfer from PCB through out housing wall.
Goal is outside surface temperature won't raise up more than 55*C, but the heat from PCB inside won't overheat.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

zkakz123's profile