SimScale simulation projects by wseppelt | Page 1

wseppelt's profile

Conjugate heat transfer simulation tutorial.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Solve it with Simscale Challenge Problem.

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

FEA Master Class Session 3 handout: In this project the drop test of an iPhone 6 has been performed with and without case.

quick test to get basics of MRF technique

Testing importing a hex mesh from Salome Meca.  Model solved with expected results.  Slight issue with missing a few elements for the fixed end condition.  This caused some local hot spots on the fixed end.  Overall an easy and effective way to use a hex mesh in Simscale.

This project contains the geometry of the extruder for the first homework assignment of the 3D Printing workshop.

Test case of a modal analysis of a fully fixed plate.

Public Profile

wseppelt's profile