Explore agentic engineering workflow on SimScaleExperience Engineering AI
10Lmill
0
0
Statistics
1 Geometry
0 Meshes
0 Simulation setups
0 Results
1 Geometry 0 Meshes 0 Simulation setups 0 ResultsAbout this project
I have a 10-liter vertical stirred mill. Inside the chamber, there are stirring rods, a centrifugal wheel at the top, and a downward-rotating spiral. The chamber is filled with zirconia beads with a diameter of 0.3 mm. Water enters from the bottom of the chamber and is stirred by rotation. The water is required to overflow through the screen, while the zirconia beads must not rise to the screen level.
